References

Adani Mining Pty Ltd (2013) Carmichael coal mine and rail project SEIS. Volume 2 – mine studies. Prepared by GHD for Adani Mining Pty Ltd, Australia. Viewed 25 February 2016, http://www.adanimining.com/Common/Uploads/SEISDocuments/12_SEISDoc_Volume%202%20Mine%20Studies.pdf.

Barrett D, Couch CA, Metcalfe DJ, Lytton L, Adhikary DP and Schmidt RK (2013) Methodology for bioregional assessments of the impacts of coal seam gas and coal mining development on water resources. A report prepared for the Independent Expert Scientific Committee on Coal Seam Gas and Large Coal Mining Development through the Department of the Environment, CSIRO and Geoscience Australia, Australia. Viewed at 4 September 2015, http://www.iesc.environment.gov.au/publications/methodology-bioregional-assessments-impacts-coal-seam-gas-and-coal-mining-development-water.

Burgman M (2005) Risks and decisions for conservation and environmental management. 1st edn. Cambridge University Press, Cambridge. Viewed 25 February 2016, http://dx.doi.org/10.1017/CBO9780511614279.

Correia dos Santos R, Caldeira L and Serra J (2012) FMEA of a tailings dam. Georisk 6(2), 89–104.

Crosbie R, Peeters L and Carey H (2016) Groundwater modelling. Submethodology M07 from the Bioregional Assessment Technical Programme. Department of the Environment and Energy, Bureau of Meteorology, CSIRO and Geoscience Australia, Australia. http://data.bioregionalassessments.gov.au/submethodology/M07.

Daling PM and Geffen CA (1983) Evaluation of safety assessment methods for the mining industry. Volume ii. User’s manual of safety assessment methods for mine safety officials. Bureau of Mines Open File Report 195(2)-83. Bureau of Mines, United States Department of the Interior, Washington DC, USA.

Dhillon B (2009) Mining equipment safety: a review, analysis methods and improvement strategies. International Journal of Mining, Reclamation and Environment 23(3), 167–179.

Garthwaite PH, Kadane JB and O'Hagan A (2005) Statistical methods for eliciting probability distributions. Journal of the American Statistical Association 100(470), 680–701. DOI 10.1198/016214505000000105.

Ericson CAI (2005) Hazard analysis techniques for system safety. John Wiley and Sons, London, England.

Haimes YY (1981) Hierarchical holographic modelling. IEEE Transactions on Systems, Man and Cybernetics 11, 606–617.

Henderson B, Hayes KR, O'Grady A, Mount R, Lewis S, Schmidt RK, Dambacher J, Barry S, Holland K and Raiber M (2016) Developing the conceptual model of causal pathways. Submethodology M05 from the Bioregional Assessment Technical Programme. Department of the Environment and Energy, Bureau of Meteorology, CSIRO and Geoscience Australia, Australia. http://data.bioregionalassessments.gov.au/submethodology/M05.

Jarrett RG and Westcott M (2010) Quantitative risk. In: Bammer G (Ed.) Dealing with uncertainties in policing serious crime. ANU E Press, Canberra. Viewed 15 April 2016, http://press.anu.edu.au?p=100761.

International Organization for Standardization (2009) ISO 31000:2009. Risk management – principles and guidelines. Viewed 25 February 2016, http://www.iso.org/iso/catalogue_detail?csnumber=43170.

Kahneman D and Tversky A (1982) On the study of statistical intuitions. Cognition 11, 123–141.

Kletz TA (1999) Hazop and Hazan: identifying and assessing process industry hazards. Institution of Chemical Engineers, Rugby, England.

Kynn M (2008) The ‘heuristics and biases’ bias in expert elicitation. Journal of the Royal Statistical Society: Series A 171, 239–264.

Lewis S (2014) Developing a coal resource development pathway. A submethodology from the Bioregional Assessment Technical Programme. Department of the Environment, Bureau of Meteorology, CSIRO and Geoscience Australia, Australia. Viewed 25 February 2016, http://data.bioregionalassessments.gov.au/submethodology/M04.

Lin X, Westcott M and Jarrett R (2013) Quantitative risk assessment: prepared for Transgrid. CSIRO Digital Productivity and Services Flagship, Australia.

McDermott R, Mikulak R and Beauregard M (1996) The basics of FMEA. Quality Resources, New York.

O’Grady AP, Mount R, Holland K, Sparrow A, Crosbie R, Marston F, Dambacher J, Hayes K, Henderson B, Pollino C and Macfarlane C (2016) Assigning receptors to water-dependent assets. Submethodology M03 from the Bioregional Assessment Technical Programme. Department of the Environment and Energy, Bureau of Meteorology, CSIRO and Geoscience Australia, Australia. http://data.bioregionalassessments.gov.au/submethodology/M03.

Ostrom LT and Wilhelmsen CA (2012) Risk assessment: tools, techniques and their applications. John Wiley & Sons. Viewed 15 April 2016, http://dx.doi.org/10.1002/9781118309629.ch9.

Ozog H and Bendixen L (1987) Hazard identification and quantification. Chemical Engineering Progress April, 55–64.

Palady P (1995) Failure modes and effects analysis: predicting and preventing problems before they occur. PT Publications, Palm Beach, Florida.

Stern P and Fineberg H (1996) Understanding risk: informing decisions in a democratic society. Committee on Risk Characterisation. Commission on Behavioural and Social Sciences and Education. National Research Council. National Academy Press, Washington, USA.

Tversky A and Kahneman D (1974) Judgment under uncertainty: heuristics and biases. Science 185, 1124–1131.

Vesely WE, Goldberg FF, Roberts NH and Haasl DF (1981) Fault tree handbook. Technical report, Systems and Reliability Research, Office of Nuclear Regulatory Research, US Nuclear Regulatory Commission, Washington, USA.

Viney N (2016) Surface water modelling. Submethodology M06 from the Bioregional Assessment Technical Programme. Department of the Environment and Energy, Bureau of Meteorology, CSIRO and Geoscience Australia, Australia. http://data.bioregionalassessments.gov.au/submethodology/M06.

Last updated:
18 October 2018